« previous next »
Pages: [1]

Author Topic: buildable head needed  (Read 4613 times)

Desertpagoda

  • Associate Member
  • Silver
  • ****
  • USA, AZ, Tucson
  • Posts: 353
buildable head needed
« on: July 23, 2022, 12:35:23 »
Hi!
 Im in need of a buildable or useable cylinder head to fit a '69 130-983. Keith khbrooks22@protonmail.com
Logged
kb

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: buildable head needed
« Reply #1 on: July 23, 2022, 13:58:07 »
Keith, you should post the casting number on the cylinder head since there is a early and late head for the M130 983 engine.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Desertpagoda

  • Associate Member
  • Silver
  • ****
  • USA, AZ, Tucson
  • Posts: 353
Re: buildable head needed
« Reply #2 on: July 23, 2022, 17:02:02 »
Yes, and i would if I had it, its at some machine welder and I can get him to respond. Its a fairly early engine number tho
Logged
kb

wjsvb ✝︎

  • Inactive
  • Silver
  • ****
  • USA, VA, Virginia Beach
  • Posts: 255
Re: buildable head needed
« Reply #3 on: July 23, 2022, 17:58:43 »
I have two M130 heads on the shelf, both used.  I can check condition tomorrow.  Casting numbers are 130 016 09 01 and 130 016 08 01(?).  LMK if either will work and I can check if they are rebuildable.  Jon
Logged
jon

67 250SL early
12 Jeep GC (gone but not missed)
69 300SEL 6.3 Euro project (gone but not forgotten)
81 280SL Euro 4spd

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: buildable head needed
« Reply #4 on: July 28, 2022, 13:57:41 »
If nothing turns up, I have several heads for M130-983 e-mail to mike.simon70@yahoo.com
Logged
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

Desertpagoda

  • Associate Member
  • Silver
  • ****
  • USA, AZ, Tucson
  • Posts: 353
Re: buildable head needed
« Reply #5 on: July 29, 2022, 00:05:21 »
thanks gents, i may be hitting u up soon, i will have a casting number on hand if i do rattle your cages
Logged
kb

Desertpagoda

  • Associate Member
  • Silver
  • ****
  • USA, AZ, Tucson
  • Posts: 353
Re: buildable head needed
« Reply #6 on: August 11, 2022, 13:08:44 »

 Morning! Keith here. I am the guy looking for a rebuildable head for a 68-69 280sl. The bad head has been at a "welder" for 8 months and I finally got it back. It has too much corrosion to repair it feasibly. The casting # is 130-016-00 01 and it works with headgasket # 130-010-33 21. Hoping you might have a core head around? Keith Brooks  520-404-2875 or 520-321-1640   THX!
Logged
kb

Desertpagoda

  • Associate Member
  • Silver
  • ****
  • USA, AZ, Tucson
  • Posts: 353
Re: buildable head needed
« Reply #7 on: November 13, 2022, 21:05:58 »
Anyone have one of these heads for sale?
Logged
kb
Pages: [1]
« previous next »