Author Topic: Passaenger-side Front Inner Wheel House Thin Panel that Connects House to Fender  (Read 2259 times)

Cole

  • Full Member
  • Senior
  • ***
  • USA, CA, Los Angeles
  • Posts: 114
Hi,

On the outer side of both front, inner wheel houses, there's a thin connecting panel that is bolted onto the edge of the housing and fender.
Please see attached pictures with the missing panel enlcosed in a orange.
If you have access to a pagoda it will probably be more clear.
I need this panel on the passanger side.

Thanks!
Cole
Cole
'69 280SL, 40G Black/Burgundy Interior

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2922
    • http://www.colinferns.com
A113 840135 or A1138840235
Available from your Mercedes dealer and not very expensive.

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5492
If you are calling dealer about it, there are a couple of weatherstrips that are coming with it, one per side, A 000 987 16 51 RUBBER SEAL replaced with A 110 884 00 98 SEAL 770 MM AT PARTITION PANELS

There is also discussion on the Forum about the type of screws used for it. Cannot find now, but as I recall - hexhead tapping screws 5.5mm with washers, 6 per side.
« Last Edit: June 06, 2023, 15:54:07 by Pawel66 »
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

Cole

  • Full Member
  • Senior
  • ***
  • USA, CA, Los Angeles
  • Posts: 114
Thanks a lot, guys!
Much appreciated!

Cole
Cole
'69 280SL, 40G Black/Burgundy Interior