Dear Friend
In my opinion the best bet is to go for Bosch AL69X, this is an alternator you can find everywhere, which has internal regulation instead of external as original pagoda alternator.
This one has externally the same appearance as original, and on the back has just two connections for “0” shaped standard terminals.
On one terminal you will place the T30 large gauge cable, and on the other the blue cable that comes to your external voltage regulator.
As this alternator produces 80A, you need to bring one thicker t30 cable to the connection hub that goes to the starter t30 terminal. Original cables are 4 mm2 to the cabin loom (directly to main light switch, you may leave that one as is) and another 4mm2 cable to the connection box on the fender or below the oil pan that later brings power to starter. This loom will be have to be changed to a larger diameter cable, at least 8mm2 to bring all that excess juice to your battery through the existing connection battery/starter.
Is just a 700 mm section, so if you buy 1 meter of larger cable you are good to go.
Best regards
L.Peterssen