Author Topic: hooking up tail lights  (Read 1922 times)

CJHenderson

  • Full Member
  • Silver
  • ****
  • USA, AR, Benton
  • Posts: 469
hooking up tail lights
« on: September 22, 2023, 17:36:34 »
Since there is only two connections for the taillights, one for the taillights assembly and one for the license plate, I modify the side marker to tie into the license plate plug. Question is will this work?
1970 280SL/8 W113 101624 miles.
1950 MG-TD
2021 Harley Davidson CVO Trike

lpeterssen

  • Vendor
  • Gold
  • *****
  • USA, FL, Miami
  • Posts: 665
Re: hooking up tail lights
« Reply #1 on: September 22, 2023, 19:17:18 »
Dear Mr Henderson

Yes that will work but I do not like the approach you made. It is much better that you open the black connector and solder your additional wires red & black there.

Those red ring tongue terminals may touch each other if they turn and that will cause a short.

Best regards
Lp

CJHenderson

  • Full Member
  • Silver
  • ****
  • USA, AR, Benton
  • Posts: 469
Re: hooking up tail lights
« Reply #2 on: September 23, 2023, 14:48:55 »
Thanks for the concern and will make sure the terminal ends are secured from touching. 
1970 280SL/8 W113 101624 miles.
1950 MG-TD
2021 Harley Davidson CVO Trike