Author Topic: stainless steel exhaust make in Europe  (Read 901 times)

Peter

  • Full Member
  • Silver
  • ****
  • Netherlands, North Brabant, Helmond
  • Posts: 472
stainless steel exhaust make in Europe
« on: March 16, 2024, 11:48:09 »
I have an Original Mercedes Benz exhaust that makes a very loud, low and ugly sound from new.
I have discussed this with the Classic parts department (Thomas Budde), but they do not take any responsibility. Unfortunately €2500 wasted.

I will switched now to a stainless steel exhaust. I see many exhausts offered, but which  exhaust make (in Europe) offers the most authentic Pagoda sound?

Thanks for your experiences, Peter

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1454
Re: stainless steel exhaust make in Europe
« Reply #1 on: March 16, 2024, 12:32:27 »
Hi,
stainless steal exhausts from https://www.theo-sobkowiak.de are recommended by German Pagodentreff.
...WRe

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5721
    • http://SL113.org
Re: stainless steel exhaust make in Europe
« Reply #2 on: March 16, 2024, 13:41:47 »
€2.500 yikes! For a mild steel system that will eventually fail and sounds bad, that is disappointing indeed.

You may want to check with the good people at Van Dijk in Lisserbroek. I got a slightly used stainless system from them (likely for under €500 but don't recall now) in 2003 and have been 100% happy with it. Clamped it together, still looks new and sounds great 20 years later. Not tinny or raspy sounding at all.

Unless your MB system was welded together, you can offer it on Ebay/Marktplaats, some people really only want OEM on their car, and recoup some of the cost. Even if it has been welded, you can have it modified to clamp-style, or just cut clean through to make it 'shippable' and have next owner weld back together.
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

Peter

  • Full Member
  • Silver
  • ****
  • Netherlands, North Brabant, Helmond
  • Posts: 472
Re: stainless steel exhaust make in Europe
« Reply #3 on: March 17, 2024, 10:14:51 »
Thanks,

I will contact Frank van Dijk and check if he has experience with Sobkowiak exhausts or other makes.