Author Topic: Starter install note  (Read 579 times)

ctaylor738

  • Full Member
  • Platinum
  • ******
  • USA, VA, Falls Church
  • Posts: 1171
Starter install note
« on: March 09, 2024, 19:22:18 »
I just installed a Bosch SR59X starter in #133 to improve its cranking speed.  It certainly accomplished that.

But on these starters, the lower mounting hole is not threaded.  You will need to put a nut on it.  So you will need a longer screw, M12-80, and a nut.

Suggest having these parts on hand before you start this job!

Cheers,

CT
Chuck Taylor
1963 230SL #00133
1970 280SL #13027 (restored and sold)
1966 230SL #15274 (sold)
1970 280SL #14076 (sold)
Falls Church VA