Soft top gap

[Savakis]

Hello, after I managed to replace the soft top fabric I noticed that the rear ends of the cloth are not symmetrical.

The left side sits higher than expected and creates a horizontal gap whereas the right side seems to be closing well.

Is there a way to adjust the frame or play with the soft top's tension in order to overcome the problem?

Please check the attached pictures.

I would welcome your comments.

[Sead]

you need to reglue it again.
pull the lower part of fabric a little bit over the lower edge of the bow - all the way from left to right side. This will result in perfect fit

[Savakis]

you need to reglue it again.
pull the lower part of fabric a little bit over the lower edge of the bow - all the way from left to right side. This will result in perfect fit

i'll give it a try, many thanks.