Rear View Mirror Glass Gasket

[m300cab]

Hello all, I'm working on a 1963 rear view mirror. I had it re-chromed.
Now I need the gasket that goes around the actual  mirror.
I can't seem to find a source.  I may use almond colored window sealer from a tube.
Thank you

[Desertpagoda]

Not avail from the dealer? I have bought the trapezoidal glass and retainer drom MB within the last 45 days? kb

[66andBlue]

Hello all, I'm working on a 1963 rear view mirror. I had it re-chromed.
Now I need the gasket that goes around the actual  mirror.
I can't seem to find a source.  I may use almond colored window sealer from a tube.
Thank you

Which rear view mirror, outside or inside?

[WRe]

Hi,
do you mean this one: https://www.sls-hh-shop.de/main/en/mercedes-230-280sl-w113-/81-mirrors-sunvisors-int-ext-eqmt-/a0008110165-replacement-nylon-bezel-p-2487.
Should be available at MB or here:
https://www.niemoeller.de/en/w113/w113/B042/810/c81010-mounting-ring
https://www.authenticclassics.com/Mirror-Retainer-Ring-for-220S-SE-230SL-250SL-p/auth-004233.htm.
...WRe

[Pawel66]

It is available at the dealers.

For goose neck, up to ident. no.: 043 002979, it is A 000 811 01 65 for about $12.
Later one, A 108 811 00 65 for about $25.

Quality is important, I would buy from the dealers.

For the central rear view mirror, the one inside, there is no gasket as a separate part, the mirror came as a whole.

[m300cab]

IT'S The inside mirror.  The Classic Center could Not Help

[Pawel66]

There is no such part on the parts list. Inside mirror comes as one piece as a spare part.

[m300cab]

great, thank you.
I purchased bisque caulk in a tube. going to replicate the gasket.

[acbrock]

I know this thread is long dead but just in case someone found another option. I am looking for the the Gasket for the Inside Rear View Mirror.  Seems crazy that would have have to purchase a whole new mirror just for that one Gasket?  I will keep searching.

[BobH]

I took my mirror apart to have the glass re-silvered, and i didn't take much notice of the gasket, if you measure it, can you not buy a length from a supplier of silicon, rubber or plastic profiles?

[m300cab]

I purchased almond caulk for mine.
I have not actually finished the project.
my plan is to use the caulk as the gasket.

[stickandrudderman]

I use good old fashioned glazing putty.