Author Topic: P.S. filter question  (Read 2586 times)

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 568
P.S. filter question
« on: April 15, 2006, 21:37:10 »
Dumb question. I wanted to change the power steering fluid filter in the bottom of the reservoir, but could not remove the metal baffle that is above it.
Do these lift out?, screw out, or, is there another way to remove it?
Thanks
Gus
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084

bpossel

  • Guest
Re: P.S. filter question
« Reply #1 on: April 16, 2006, 06:32:11 »
Hi Gus,

The plate simply lifts out.  I take it out using a small screw driver and stick it through the hole on the plate.  With the screw driver at an angle it will help to remove the plate.
Bob


bpossel  (Memphis, TN.)
'71 280SL  /  '97 E320

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 568
Re: P.S. filter question
« Reply #2 on: April 16, 2006, 10:48:12 »
Thank you very much Bob. I was lifting up with a hooked coat hanger, maybe I'm weaker than I thought. I'll try it again with a screw driver blade.

inspectorgm
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084