Author Topic: wires to power antenna  (Read 3730 times)

BaronYoungman

  • Full Member
  • Gold
  • *****
  • USA, IL, Joliet
  • Posts: 604
  • Veronica...
wires to power antenna
« on: July 29, 2008, 09:46:27 »
I am replacing my 2 ton original Hirschmann power antenna with hirschmann 2040 replacement.  There is a huge plug that plugs into the antenna(old) so I cut the cord and there are 3 wires inside.  A black that I traced to the engine compartment that is a ground and screwed to the firewall.  There are 2 other wires that seem to go to the 2 fuses that are located by the cooling overflow tank.  Which is which and what do they power, because they look as thought the white one also is in series and connects to something else by the glove compartment.

Thank, Bob
DOWN TO 5 BOXES!!
Bob "Baron" Youngman
1971 280 SL silver  1 car 0 boxes
1983 500sec Wheeler Dealer AMG Widebody
1985 500sec Paris Autoshow AMG coupe
1994 320sl wifes car
1988 560sec  Japan "Yakuza Car"

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4733
Re: wires to power antenna
« Reply #1 on: July 29, 2008, 11:14:52 »
Bob,
on my car one fuse is for the power to the radio and the other can be used for the antenna.
Take a look at this topic perhaps the answer is there.
http://www.sl113.com/forums/index.php?topic=7537
« Last Edit: November 14, 2008, 16:58:18 by vanesp »
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)