Author Topic: need a rear driveshaft for my 4sp 71 280sl???  (Read 5111 times)

erickmarciano

  • Associate Member
  • Gold
  • *****
  • Canada, Quebec, montreal
  • Posts: 545
need a rear driveshaft for my 4sp 71 280sl???
« on: November 17, 2008, 18:37:35 »
Hi all . what other car can I get a rear driveshaft for my 1971 280sl?on the late cars the rear joint can not be changed I was told.
thanks
1994 E500 W124
1971 280sl
1989 Porsche 930 coupe
1988 e30 m3
2001 ducati mh900
2006 ps1000
1962 Vespa GS160

auret

  • Guest
Re: need a rear driveshaft for my 4sp 71 280sl???
« Reply #1 on: November 17, 2008, 19:36:39 »
You can get a rebuilt driveshaft from Driveline Services of Portland for $371 including shipping in the continental US. Pretty reasonable Ithink.
Auret.

merrill

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1372
Re: need a rear driveshaft for my 4sp 71 280sl???
« Reply #2 on: November 18, 2008, 00:23:07 »
I purchased a rebuilt drive shaft from drive line for my 78 300d.

I have not had any problems with the rebuilt drive shaft
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230

erickmarciano

  • Associate Member
  • Gold
  • *****
  • Canada, Quebec, montreal
  • Posts: 545
Re: need a rear driveshaft for my 4sp 71 280sl???
« Reply #3 on: December 01, 2008, 14:25:53 »
any interchange part with the sedans?if so which one?
thanks
1994 E500 W124
1971 280sl
1989 Porsche 930 coupe
1988 e30 m3
2001 ducati mh900
2006 ps1000
1962 Vespa GS160

al_lieffring

  • Guest
Re: need a rear driveshaft for my 4sp 71 280sl???
« Reply #4 on: December 01, 2008, 15:57:29 »
any interchange part with the sedans?if so which one?
thanks

Sedan and coupe drive shafts are nearly twice as long as one for a 280sl. there are many other differences including the center carrier bearings and different flex disc configurations.

Raymond

  • Full Member
  • Platinum
  • ******
  • USA, FL, Jacksonville
  • Posts: 1206
    • GemstoneMediaInc.com
Re: need a rear driveshaft for my 4sp 71 280sl???
« Reply #5 on: December 21, 2008, 16:38:04 »
You might try Bud's Benz near Atlanta.  I was looking for the front section and they quoted $276.00.  If they have the front for me, they may have the back for you.  You might also ask Onanger near San Diego.  I've had good luck with other salvage parts from them.  I know Sun Valley doesn't have one at the moment.
Ray
'68 280SL 5-spd "California" Coupe