Author Topic: Hood/Bonnet seal  (Read 5433 times)

Ulf

  • Associate Member
  • Gold
  • *****
  • Denmark, Fredericksberg, Rungsted Kyst
  • Posts: 838
Hood/Bonnet seal
« on: April 14, 2009, 10:39:46 »
I've noticed a lot of water assembling in the engine compartment underneath the coolant expansion tank after washing the car as the hood/bonnet has no rubber seal. I've searched a few websites for such a seal but it doesn't seem to exist...can this really be true?

Best regards

Ulf
1965 230 SL in silver (DB180)
1982 Land Rover Series III SWB
2008 Jaguar XF 3.0
2005 Mini Cooper

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Hood/Bonnet seal
« Reply #1 on: April 14, 2009, 10:59:56 »
Ulf,

There is no seal but there is a drain hole in that cavity which is often blocked.

I will try to find a picture and post it later.

naj
68 280SL

bpossel

  • Guest
Re: Hood/Bonnet seal
« Reply #2 on: April 14, 2009, 11:57:47 »
Naj,

Is this the drain hole you are thinking of?
Bob

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Hood/Bonnet seal
« Reply #3 on: April 14, 2009, 12:37:15 »
Yes, Bob,

Thats the one!

Is there a similar one under the brake booster?

Thanks
naj
« Last Edit: April 14, 2009, 12:39:44 by naj »
68 280SL

bpossel

  • Guest
Re: Hood/Bonnet seal
« Reply #4 on: April 14, 2009, 17:12:13 »
Here's the drain under the brake booster...
Note 100% perfect design...  I still get a bit of water that will pool behind this drain hole after I wash the car.
I just go in and sponge it up....

Bob
« Last Edit: April 14, 2009, 17:16:53 by bpossel »

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Hood/Bonnet seal
« Reply #5 on: April 14, 2009, 18:23:56 »
Thanks, Bob,

Not seen that one before!

naj
68 280SL

jharkin

  • Inactive
  • Regular
  • **
  • USA, AZ, Chandler
  • Posts: 86
Re: Hood/Bonnet seal
« Reply #6 on: April 14, 2009, 23:19:05 »
i try to avoid driving in the rain, and since i discovered Griot's spray wash, i haevn't used a hose on the car in months, but when i did wash the car these little puddles were another reason rt drive it  around to clear  them out of the engine bay...
68 250SL White over Blue manual
84 280CE Lapis Blue auto
67 250SL Silver Gray auto,  sold :(
63 230SL Metallic Blue manual,  sold

bpossel

  • Guest
Re: Hood/Bonnet seal
« Reply #7 on: April 15, 2009, 00:16:25 »
I heard Joe A. mention this a few years ago and I have done this ever since....
After washing and drying the car, I go for a drive to do a final "blow dry".  This really helps to dry out all of the nooks and crannies...
Thanks Joe!
Bob

Ulf

  • Associate Member
  • Gold
  • *****
  • Denmark, Fredericksberg, Rungsted Kyst
  • Posts: 838
Re: Hood/Bonnet seal
« Reply #8 on: April 15, 2009, 10:58:31 »
Thanks - I'll go with Sponge Bobs' suggestion... :D

Ulf
1965 230 SL in silver (DB180)
1982 Land Rover Series III SWB
2008 Jaguar XF 3.0
2005 Mini Cooper