I recently purchased two replacement window cranks for my 68 280SL over the Internet. The parts I received are genuine MB parts, but are somewhat different. the old ones have one slot, with a recess on the back for the insert clip to slide into.
The new ones have two slots and no recess, so the insert doesn't want to slide on. Also, the hole for the attachment screw is too big, allowing the screw to go straight through.
The knobs are also different, with the silver stripe being on the outer edge of the knob instead of on the face. Finally, the cylindrical section that pushes up against the door is longer, so the crank sits out farther. Other than that, they're perfect!
These seem to be the typical replacement offered by several sources. I searched the forum, figuring this must've been covered before, but came up blank. Any suggestions, other than rechroming the old ones?
Download Attachment: window_cranks.jpg54.11 KB
John Livingston
Newport News, VA
1968 280SL 4 speed