Author Topic: Speedometer cable 1967 250sl automatic  (Read 3937 times)

jnash

  • Guest
Speedometer cable 1967 250sl automatic
« on: January 21, 2010, 20:43:50 »
My speedometer cable squeaks and chirps when the weather gets cold
The sound coincides with the speedometer slightly jumping
Is there anyway to lube it?
How do I get to it?

w113dude

  • Guest
Re: Speedometer cable 1967 250sl automatic
« Reply #1 on: January 21, 2010, 22:38:10 »
Yes, you can lube it, I did mine a long time ago, I don't remember exactly which end but i was able to take it apart clean the inner cable, grease it and put it back together, Check both ends one of them should be easier to un-crimp than the other.

Good Luck,

georgem

  • Full Member
  • Gold
  • *****
  • Australia, Queensland, Birkdale
  • Posts: 510
Re: Speedometer cable 1967 250sl automatic
« Reply #2 on: January 21, 2010, 23:06:52 »
Hey jnash,

I posted a detailed description on this  topic before Christmas - its quite easy and can be done without taking the speedo out - with a bit of contortion, the speedo cable can be disconnected from the gear box end (on a 230manual at least ) and the inner pulled out and greased - easy peasy instant fix. The front of the car needs to be on ramps.

Cheers

George
George McDonald
Brisbane
230 Sl
1973 VW Kombi Single Cab Ute
2022 Volvo XC 40 Pure (100% electric)

jnash

  • Guest
Re: Speedometer cable 1967 250sl automatic
« Reply #3 on: January 24, 2010, 20:14:43 »
Yes, you can lube it, I did mine a long time ago, I don't remember exactly which end but i was able to take it apart clean the inner cable, grease it and put it back together, Check both ends one of them should be easier to un-crimp than the other.

Thanks
 I will check it out
« Last Edit: January 25, 2010, 16:07:27 by Peter van Es »

merl

  • Guest
Re: Speedometer cable 1967 250sl automatic
« Reply #4 on: January 24, 2010, 20:29:55 »
did you find a small nylon bushing on one end of the cable? if so on which end. i have a 280sl and you can pull the cable through the speedometer end without removing the housing from the auto. trans. looks the same as the tack cable perhaps someone replaced with a tack cable? it did work