« previous next »
Pages: [1]

Author Topic: Brake caliper pistons  (Read 2697 times)

glenn

  • Guest
Brake caliper pistons
« on: May 09, 2010, 13:20:39 »
Do MB caliper pistons rotate on any newer models???  Just replaced the brake pads on a '05 Honda Accord.  The (single) pistons rotate as the pads wear.  Cool, eh??
Logged

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7219
  • Benz Dr.
Re: Brake caliper pistons
« Reply #1 on: May 10, 2010, 04:32:12 »
I can't say for sure on newer cars but they aren't on older cars.

 The piston is positioned a certain way so that when the brakes are used the front of the pad hits the rotor first. This feature requires that the pistons remain in the same fixed position so the brakes work as designed.
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Bernd

  • Guest
Re: Brake caliper pistons
« Reply #2 on: May 18, 2010, 00:01:55 »
Dan is absolutely correct. They are not designed to rotate. Also, there is an installation aid that is basically a triangular piece that has a 20 degree bevel which helps in aligning them properly. If you look at the enclosed picture from my front ATE caliper piston you will see the raised portion at the rim. That is raised so that the pistons do what Dan indicated
Logged
Pages: [1]
« previous next »