floor pan rubber water plug grommetts

[rmmchl]

My rubber plugs that fit on the floor pan part under the seats deteriorated. Does anyone know the part number to these. without them I have a hole right through the pan.

[badali]

Do you have a picture and the size of the holes?  I am stripping a parts car and there are allot of grommets that are good.

[rmmchl]

badali-I don't have a way of putting pictures on. They are about a 3/8 inch circular hole on the passenger side on the pan  under the seat, about 4 inches from the console box hump, on the floor pan. I think there is one the passenger side also. Rubber grommetts go in the hole. When I was scrapping the tar crap off of my floor pans, they dissolved.The rubber was dri-rotted.

[badali]

I'll see if I can salvage some from the parts car.  If I have any you can have them free.  I'll look tomorrow.

[badali]

I found 2 type of floor plugs.  The first one is rubber and the second is plastic and has threads.  The only 3/8" holes I found in the floor were threaded for seat belt mounts.  If these are the holes you need plugs for then I may have a few more.  I could only salvage one but I think I have more in another box of parts.  The other plugs I have a handful of and are also available.

[rmmchl]

It's the rubber one. the picture looks correct

[badali]

How many do you need?

[rmmchl]

2------------------my e-mail is rmmchl@cs.com--------------e-mail me and I will give you my address -thank you