Dear guys,
Hopefully one off you can help me with this challenge.
It's a 280 automatic sl with a strange problem.(k-jetronic)
Car has spent 6 years without starting.
New fuel distribution unit installed+filter+cold start valve+relays.
With fuel pump connected car won't start.If you just let the pump work(switch on for 15 seconds )to pressurize the system then remove one wire from the fuel pump,
car will start, idle rough and rich for like 3 or 4 minutes.
When you connect the loose wire back to the fuel pump car will stall imediately.
I suspect a bad wire or ignition switch.Any ideas
Thank for your help ,keep up the great work.
Richard