Author Topic: Booster Needed  (Read 2842 times)

duffelpud

  • Guest
Booster Needed
« on: October 04, 2011, 19:05:29 »
My booster has developed a leak and I'm wondering if anyone has a lead on a replacement unit for my 1967 250sl?

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4198
Re: Booster Needed
« Reply #1 on: October 04, 2011, 20:06:44 »
All the usual suspects - K&K, Miller's, Buds, and our own Dave Gallon. Be prepared, these are not cheap.$400 +/- I would expect.
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

hands_aus

  • Full Member
  • Platinum
  • ******
  • Australia, Queensland, Brisbane
  • Posts: 1543
Re: Booster Needed
« Reply #2 on: October 07, 2011, 05:11:21 »
they can be rebuilt I believe
Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL #114, auto, ps , 717,717
best of the best

Bonanza

  • Guest
Re: Booster Needed
« Reply #3 on: October 10, 2011, 18:57:15 »
I had to replace the booster on my 230SL last fall. I got my part from Millers . When you install the booster pay special attention to the pivot bolt on the actuator rod. If the bolt is not cleaned and lubricated and moving freely ,when you apply the brakes and then release them the actuator does not return all the way. This caused me alot of grief!      Good Luck.

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: Booster Needed
« Reply #4 on: October 10, 2011, 19:33:07 »
A few years ago, I used Power Brake Exchange in San Jose to have mine rebuilt. Price was less than $200 back then.
Here are some reference threads:
http://www.sl113.org/forums/index.php?topic=3585
http://www.sl113.org/forums/index.php?topic=2067
http://www.sl113.org/forums/index.php?topic=531
Waqas (Wa-kaas) in Austin, Texas