« previous next »
Pages: [1]

Author Topic: Supplier for Differential Mount Assembly?  (Read 3825 times)

duffelpud

  • Guest
Supplier for Differential Mount Assembly?
« on: January 24, 2012, 04:41:03 »
I need to replace mine as I begin the quest to eliminate noise from the back end.  Does anyone have a link to a source?  I believe I need parts 130-135 here: http://www.sl113.org/forums/uploaded/jeffc280sl/200824181112_cross%20strut.jpg
Logged

Iconic

  • Full Member
  • Platinum
  • ******
  • USA, IL, Highland Park
  • Posts: 1203
  • ex-Membership Administrator
Re: Supplier for Differential Mount Assembly?
« Reply #1 on: January 24, 2012, 18:34:17 »
I recently bought the main part (130) from the MB Classic Center.
The part was correct and works as it should ... of course.

(I have no affiliation with the MB Classic Center.  :D I wish I did.)
Logged
1970 280 SL Automatic, USA version, Grey-Blue (906G/906G), Blue leather (245)
1968 SS396 Camaro Convertible (owned since 1977 -- my first car :D)
1984 Porsche Euro Carrera coupe, LSD, SlateBlueMet/Blue
1998 BMW M-Rdstr Estoril Blue
1970 280 SL Automatic, Anthracite Grey-173G, Red Interior-132 - sold

franjo_66

  • Full Member
  • Silver
  • ****
  • Australia, NSW, Point Piper
  • Posts: 458
Re: Supplier for Differential Mount Assembly?
« Reply #2 on: January 24, 2012, 21:12:31 »
I replaced all my parts (as per your diagram). These were bought from the following vendors:

www.autohausaz.com

http://www.sls-hh-shop.de/index.php/language/en/cat/c3_Mercedes-Benz-230SL-250SL-280SL-Pagoda--R113-W113-.html

Regards
Frank
Logged
Franjo

1965 230SL Black/Auto/RHD
2005 Porsche Cayenne Turbo
1983 BMW 735i
1986 560 SEC
1991 500SL
1982 Holden Statesman DeVille

GGR

  • Associate Member
  • Platinum
  • ******
  • USA, DC, Washington
  • Posts: 1470
Re: Supplier for Differential Mount Assembly?
« Reply #3 on: January 25, 2012, 20:57:26 »
slightly OT, but may be of interest for the OP: The W112 p/n is different. The mount does not have these openings in the rubber part and I believe the shore is harder. Would anybody know the reason? Would fitting the W112 mount be an improvement ? What would be the draw backs ?
Logged
Pages: [1]
« previous next »