Author Topic: Battery cable route to starter  (Read 6874 times)

rutger kohler

  • Associate Member
  • Gold
  • *****
  • New Zealand, Auckland, Auckland
  • Posts: 505
Battery cable route to starter
« on: February 15, 2012, 07:15:38 »
There are some very good photos of the route for the battery cable to the  starter, posted already, however I am interested in where these photos leave off at the front of the oil sump.  Can anyone show me where the brackets go from here to the starter itself plse.  Also the last bracket on the  front of the oil sump brings the cable perilously close to the exhaust?
1969 280 SL Manual gear shift
1972 280SE 3.5 auto

Richard Madison

  • Associate Member
  • Platinum
  • ******
  • USA, NY, New York
  • Posts: 1181
Re: Battery cable route to starter
« Reply #1 on: February 15, 2012, 10:21:42 »
You have a Right Hand Drive car?

Richard M, NYC
1969 280 SL, Tunis Beige, Euro Model (Italy).

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Battery cable route to starter
« Reply #2 on: February 15, 2012, 11:39:37 »

  Also the last bracket on the  front of the oil sump brings the cable perilously close to the exhaust?


Here's one for the front of the engine. LHD car

Naj
68 280SL

rutger kohler

  • Associate Member
  • Gold
  • *****
  • New Zealand, Auckland, Auckland
  • Posts: 505
Re: Battery cable route to starter
« Reply #3 on: February 15, 2012, 21:24:49 »
Hi, yes I do have a RHD car.  Thanks Naj,  I have an extra drop down braket in the middle of the sump and I am wondering whether it should be down the side towards the stater motor?
1969 280 SL Manual gear shift
1972 280SE 3.5 auto

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4735
Re: Battery cable route to starter
« Reply #4 on: February 16, 2012, 06:26:21 »
A few photos showing the route before engine rebuilt and after. The bracket in the middle on my engine is not a grommet type but just a clamp.
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

rutger kohler

  • Associate Member
  • Gold
  • *****
  • New Zealand, Auckland, Auckland
  • Posts: 505
Re: Battery cable route to starter
« Reply #5 on: February 16, 2012, 07:41:47 »
Hi thanks all for that.  It seems i am missing a few of the brackets on the starter side.  In the meantime I have taken the stright bar fitting off, under the damper and moved it aroiund to the starter side.  A lot harder to retro fit the brackets on the starter side  with everthing in.  Nice  refit on the engine!
1969 280 SL Manual gear shift
1972 280SE 3.5 auto