Author Topic: Proper Height of Front End - 1965 230 SL  (Read 3041 times)

rjmarco

  • Associate Member
  • Senior
  • ***
  • USA, CA, Alamo
  • Posts: 178
Proper Height of Front End - 1965 230 SL
« on: October 21, 2012, 04:30:15 »
I'm continuing to work on my beloved project car. 

I've noticed that my front end looks a bit lower than what I see in 230 SL photos from the clearance of the top of the tire to the fender.  Not really that bad, but noticeable to me.  I asked my MBZ dealer and they also think the car is slightly lower on the driver's side compared to the passenger's side.  What would be the cause of this?  Coil springs just too old?  The car has about 52 k miles. 

Thanks!
Rich
Alamo, CA

Flyair

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin Jeziorna
  • Posts: 1920
Re: Proper Height of Front End - 1965 230 SL
« Reply #1 on: October 21, 2012, 07:15:06 »
I would house the flooding checklist items to resolve the problem:

1. check if the assessment at MBZ was performed with you sitting in the car. If so, repeat the assessment with the car empty
2. Otherwise, have the suspension parts checked to see if they are matching the original part numbers
3. In all other cases, follow the instructions received from the mechanician.  ;D

good luck
« Last Edit: October 21, 2012, 07:23:55 by Flyair »
Stan
1971 280SL
2011 SL550 AMG
2011 GL
2015 GLA

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4076
Re: Proper Height of Front End - 1965 230 SL
« Reply #2 on: October 21, 2012, 08:29:41 »
There are many topics on the correct ride height. Search for that term on the forum..
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!

rjmarco

  • Associate Member
  • Senior
  • ***
  • USA, CA, Alamo
  • Posts: 178
Re: Proper Height of Front End - 1965 230 SL
« Reply #3 on: October 21, 2012, 12:14:26 »
Thanks for the help with this.  Good suggestions. 
Rich
Alamo, CA