« previous next »
Pages: [1]

Author Topic: Exhaust Clamps  (Read 2200 times)

SilverSpear

  • Associate Member
  • Senior
  • ***
  • Abu Dhabi, UAE
  • Posts: 238
Exhaust Clamps
« on: January 30, 2013, 12:09:50 »
Hello guys,

Tried to look for info about the correct clamp sizes without luck.
Can anyone pls provide some info about sizes, quantities and fitment location?

Thanks
Logged
Early 1967 Pagoda 250SL - Under comprehensive restoration
Euro 2013 Mercedes 350SL

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Exhaust Clamps
« Reply #1 on: January 31, 2013, 04:41:52 »
No clamps on an original installation. Everything is welded.   Just measure the diameter of the pipes you are installing. Seems like 1 7/8" sounds familiar.   That should be around 46mm plus or minus. Check to make sure.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

SilverSpear

  • Associate Member
  • Senior
  • ***
  • Abu Dhabi, UAE
  • Posts: 238
Re: Exhaust Clamps
« Reply #2 on: January 31, 2013, 22:47:06 »
Oh now I understand why there are no clamp details in all those Pagoda exhaust graphs:

http://www.sls-hh-shop.de/en/230-280SL-W113/49-a-Exhaust-System-standard/?_artperpage=10

Thanks!
Logged
Early 1967 Pagoda 250SL - Under comprehensive restoration
Euro 2013 Mercedes 350SL
Pages: [1]
« previous next »