Author Topic: attaching covers to door panels  (Read 3823 times)

Fintail

  • Guest
attaching covers to door panels
« on: May 07, 2013, 18:25:39 »
Good evening all

A 280sl needs interior tidy, a kit obtained in leather from the US. Seats done. My question if I may is are the preformed leather covers attached only on the rear side with Glue/staples or is the entire door card glued. The old covers were vinyl with thin foam back and fully glued to the card.

Thank you in advance

John Fintail

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 568
Re: attaching covers to door panels
« Reply #1 on: May 08, 2013, 03:25:34 »
Leather (or vinyl) is glued and stapled to the back (outside) of the cards.
The cards are retained in place by the various trims.

Gus
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084

Fintail

  • Guest
Re: attaching covers to door panels
« Reply #2 on: May 08, 2013, 07:15:27 »
Thank you Gus

All the Best

John Fintail

450sl

  • Full Member
  • Silver
  • ****
  • Netherlands, Gelderland, zelhem
  • Posts: 494
Re: attaching covers to door panels
« Reply #3 on: May 08, 2013, 14:02:38 »
John Fintail      NO Glue behind the stiches  see the tech manual !!!!!!!!!!!!!!

Harry

  • Full Member
  • Gold
  • *****
  • USA, TN, Knoxville
  • Posts: 742
Re: attaching covers to door panels
« Reply #4 on: May 09, 2013, 16:02:36 »
"Outside the cards" - what do you mean by "the cards"?
Thanks,
Harry
Harry Bailey
Knoxville, TN
1966 230SL
Automatic

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 568
Re: attaching covers to door panels
« Reply #5 on: May 09, 2013, 19:04:23 »
The "cards" are the cardboard or masonite like panels that the soft upholstery material is attached (glued) to.
Outside of the cards refers to the side closest to the exterior of the car.

Gus
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084