Author Topic: rear break drums binding  (Read 2658 times)

natenate

  • Guest
rear break drums binding
« on: July 09, 2013, 20:30:49 »
hi
the back brakes on my 1967 230 sl are binding. I have noticed that it is pretty bad.  On a gentle slope the car will hold itself without applying and brakes.  I have been told that freeing the drum brakes is not a difficult job.  Has anyone got any advice or tips.  It would be much appreciated.  Thank you

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: rear break drums binding
« Reply #1 on: July 10, 2013, 01:10:22 »
Read through the sections about brakes. There should be lots about this here.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: rear break drums binding
« Reply #2 on: July 10, 2013, 05:46:27 »
Bad rubber brake hoses can be the problem in many cases. See if the rear brakes hoses are fresh. If not start by changing all four of the rubber brake hoses.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback