Author Topic: 70 280sl trans wiring  (Read 2829 times)

smiledoc

  • Full Member
  • Junior Level
  • *
  • USA, AR, Little Rock
  • Posts: 23
70 280sl trans wiring
« on: November 12, 2014, 19:12:05 »
does anyone have any pics of wiring terminal on drivers side of trans?? from what i gather its suppose to have 6 wires and you match large,medium and small hole terminal ends together! i have 2 extra wires one copper colored with small holed terminal and one copper with white stripe medium holed terminal ??

114015

  • Full Member
  • Platinum
  • ******
  • Germany, Nordrhein-Westfalen, Tecklenburg
  • Posts: 2080
Re: 70 280sl trans wiring
« Reply #1 on: November 12, 2014, 22:24:58 »
P/N sent.
Had to do this offline since my knowledge on this is too vague... :P :'(

Sorry,
A.
Achim
(Germany)

smiledoc

  • Full Member
  • Junior Level
  • *
  • USA, AR, Little Rock
  • Posts: 23
Re: 70 280sl trans wiring
« Reply #2 on: November 13, 2014, 04:27:05 »
Here are the two wires that I do not know where they go?   

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: 70 280sl trans wiring
« Reply #3 on: November 13, 2014, 14:18:52 »
Here is some more info .................
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4073
Re: 70 280sl trans wiring
« Reply #4 on: November 13, 2014, 21:41:49 »
The same diagram, together with more explanation is here: http://www.sl113.org/wiki/Automatic/Start
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!