Author Topic: Dash Wood Finish?  (Read 5432 times)

Trip

  • Guest
Dash Wood Finish?
« on: November 24, 2014, 23:28:42 »
Here is a simple one for the experts - is the dash wood, satin, flat, or gloss finish, or something in between?
Trip
DC

KevinC

  • Guest
Re: Dash Wood Finish?
« Reply #1 on: November 24, 2014, 23:50:32 »
If I had to guess, I would say satin.

Does your car have a hard top? The wood trim around the rear window, due to its positioning, usually holds up well and might offer you a clue to the finish.

jf308

  • Guest
Re: Dash Wood Finish?
« Reply #2 on: November 25, 2014, 00:47:26 »
I think satin, too, although I re-did mine in gloss and it looks fine to me.  Might be a bit too shiny for some, but I have heard "comments" that the factory finish is a bit too flat.  So, to each their own.

A lot of the repro replacements which I have seen have a deep gloss finish, so I replicated that

49er

  • Full Member
  • Platinum
  • ******
  • USA, CA, El Dorado Hills
  • Posts: 1426
Re: Dash Wood Finish?
« Reply #3 on: November 25, 2014, 04:24:32 »
A "flat-satin" would be how I would describe mine. Definitely not glossy.

John
1969 280SL 003820
Un Restored, All Original, including the paint
Original Owner, Purchased September 18, 1968
4 speed manual, PS. 77217 miles
7280 miles since awoken from her 20+ yr "nap" in 2010

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4198
Re: Dash Wood Finish?
« Reply #4 on: November 25, 2014, 16:31:10 »
On my 280 SL, I will go with 49er, flat/satin. Just took a look at the hardtop, and would (wood?) have to say, more towards satin.
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

mmizesko

  • Pagoda SL Board
  • Gold
  • *****
  • USA, OH, New Albany
  • Posts: 995
Re: Dash Wood Finish?
« Reply #5 on: November 25, 2014, 16:43:17 »
Just redid mine.  Satin for sure.

Mike Mizesko
Columbus, OH
1970 280SL 291H Dark Olive

Jkalplus1

  • Guest
Re: Dash Wood Finish?
« Reply #6 on: November 25, 2014, 20:52:35 »
And don't fill the grain like more recent Mercedes where the wood has a glass smooth finish.

perry113

  • Associate Member
  • Gold
  • *****
  • USA, NY, Rensselaer
  • Posts: 672
    • http://picasaweb.google.com/peterperry911113/1970280SECoupe#
Re: Dash Wood Finish?
« Reply #7 on: November 26, 2014, 12:23:31 »
We use car clear coat which can be done in a flat, semi gloss or gloss.

We are going with gloss in this example of 220seb wood. This is a total of 8 coats. 2 coats at a time then sanded and re-cleared.



Peter Perry
1970 911T Bahia Red
1972 911T Albert Blau
1963 220seb coupe barn
1965 230SL Light Ivory automatic
1966 230SL Havana Brown 4 speed Barn Find
1970 280SE living 3.5 donor car

Jkalplus1

  • Guest
Re: Dash Wood Finish?
« Reply #8 on: November 26, 2014, 12:55:00 »
Gents,
this thread: http://www.sl113.org/forums/index.php?topic=6405.0
In particular, reply #4 has an example of an untouched original.  There is also discussion on how the wood in the SL was not finished like the other Mercedes.
Jerome

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2924
    • http://www.colinferns.com
Re: Dash Wood Finish?
« Reply #9 on: November 26, 2014, 15:52:19 »
I'm not a purist and neither are many of my customers.
I ask what they would like ; light, dark, walnut, oak, gloss, matt or satin.
They get whatever suits them.
Personally I really like high gloss walnut but some people hate it.

49er

  • Full Member
  • Platinum
  • ******
  • USA, CA, El Dorado Hills
  • Posts: 1426
Re: Dash Wood Finish?
« Reply #10 on: November 27, 2014, 01:49:16 »
Here are a couple of pictures of my dash trim. Certainly not of the highest finish but at least they can't be mistaken for plastic faux wood ;)

John
1969 280SL 003820
Un Restored, All Original, including the paint
Original Owner, Purchased September 18, 1968
4 speed manual, PS. 77217 miles
7280 miles since awoken from her 20+ yr "nap" in 2010