« previous next »
Pages: [1]

Author Topic: 280 camshaft sprocket - which way round  (Read 2023 times)

aramsay

  • Guest
280 camshaft sprocket - which way round
« on: May 18, 2015, 11:10:44 »
Didn't make a note of which way round the camshaft sprocket came off......   :(

The centre boss, with the key-way, is thicker to one side. Which side goes to the outside, against the heavy/thick washer of the
retaining bolt ?

I want to make sure the run of the chain is exactly in line going down into the crankcase. It's difficult to be sure by visual (with my old eyes...) check.
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: 280 camshaft sprocket - which way round
« Reply #1 on: May 18, 2015, 13:14:58 »
The deep dished side of the sprocket faces the back of the car.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
Pages: [1]
« previous next »