Flashers/signal lights

[catjim813]

All, what would cause the flashers not to work when switch is activated?   signal lights work fine.  I replaced the flasher relay six prong switch but still the flashers will not work.  Is there a second flasher relay switch on a 69 280sl?

[Kayvan]

Did U check the auxiliary fuse box; small square brown box with knurled screw.

It controls some lighting functions

[Tyler S]

Catjim, Have a look at this thread. There are multiple ways the hazard and turn signals can be wired. All depends on year and if it was a US or Euro model. Lot of variables. Looking at the wiring diagram there is a seperate relay or flasher. It may or may not involve the hazards. No matter the hazards are fed from fuse #1. Always powered.
http://www.sl113.org/forums/index.php?topic=17648.0

[catjim813]

Kayvan, and Tyler I will look at both once I get home from work.  The bracket is already down from putting in the capillary tube so I should be able to see the wiring and see if there is a second relay switch.  Thanks for the follow-up

[Kayvan]

FYI see Manual too...may help

[Tyler S]

Kayvan, I think he is going after the hazard-flashers. He mentioned the signals and the 6 prong switch (hazard switch)