« previous next »
Pages: 1 [2]  All

Author Topic: Backfire and not running well  (Read 12925 times)

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Backfire and not running well
« Reply #25 on: July 06, 2016, 06:31:11 »
Yes, as Brad mentioned, make sure the points are good and adjusted properly. Check the dwell with a meter.  Also makes sure you have the distributor wires in correct sequence. 1,5,3,6,2,4
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Pinder

  • Full Member
  • Platinum
  • ******
  • USA, NJ, Edison
  • Posts: 1032
Re: Backfire and not running well
« Reply #26 on: July 06, 2016, 14:38:48 »
I replaced my coil and points with the Crane Cams unit. got fed up with the points. Engine runs fine now. I recommend getting rid of the points.

Also when I first got my engine running I did have an issue where I could not get it to idle unless I kept my foot on the accelerator. It turned out I had to disconnect the wire to the stop Solenoid on the injection pump which kept cutting fuel to the injection pump.
« Last Edit: July 06, 2016, 14:51:21 by Pinder »
Logged
1970 280 SL Light Ivory DB 670. 4 Speed manual shift no AC Limited Slip Diff.
1997 Corvette C5 Silver. automatic
2015 BMW 320i xdrive
2021 Mercedes GLS450 Silver
Pages: 1 [2]  All
« previous next »