« previous next »
Pages: [1]

Author Topic: Power Steering Pump spindle play query  (Read 2323 times)

swood1

  • Full Member
  • Senior
  • ***
  • United Kingdom, England, Worcester
  • Posts: 247
Power Steering Pump spindle play query
« on: August 06, 2016, 17:03:02 »
Hi all,

I just replaced all the seals on my power steering pump (250SL), however I have noticed there is about 4mm of in/out play on the spindle.  Can anyone confirm if this is correct? It maybe that I haven't tapped the sleeve in far enough.


Regards

Steven
Logged
250 SL (early), in bits. Triumph TR4a

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Power Steering Pump spindle play query
« Reply #1 on: August 06, 2016, 19:18:23 »
I've noticed some end play on almost every pump I've looked at so I think it's normal. As long as it works and doesn't leak, why ask why?
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

swood1

  • Full Member
  • Senior
  • ***
  • United Kingdom, England, Worcester
  • Posts: 247
Re: Power Steering Pump spindle play query
« Reply #2 on: August 07, 2016, 10:11:34 »
Hi Dr Benz,

Basically making sure I have rebuilt it correctly. It was in a terrible state prior to me stripping, cleaning it up and replacing all the seals.

Thanks for your response.


Steve
Logged
250 SL (early), in bits. Triumph TR4a
Pages: [1]
« previous next »