Author Topic: diff noise  (Read 2756 times)

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
diff noise
« on: May 11, 2017, 23:43:15 »
Looking for some input,  Am having a differential noise that sounds like a pinion bearing.   I just replaced the drive shaft center bearing and that help a little.   Hoping for ideas as to the cause and possible remedies.   The car is a 1966 230sl

DaveB

  • Full Member
  • Gold
  • *****
  • Australia, Western Australia, Lathlain
  • Posts: 953
Re: diff noise
« Reply #1 on: May 12, 2017, 06:02:16 »
I guess you have already tried it but can you get any movement pushing on the yoke? It should be all solid.
DaveB
'65 US 230sl 4-speed, DB190

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: diff noise
« Reply #2 on: May 14, 2017, 20:22:44 »
Thanks for the input   am going to check on the condition of all my bushings first.  Maybe I missed one and the noise is just transferring to the body.

DaveB

  • Full Member
  • Gold
  • *****
  • Australia, Western Australia, Lathlain
  • Posts: 953
Re: diff noise
« Reply #3 on: May 14, 2017, 21:38:39 »
Yes if that central rubber mount in the trunk is bad you might get metal to metal contact.
DaveB
'65 US 230sl 4-speed, DB190

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: diff noise
« Reply #4 on: May 14, 2017, 22:46:36 »
When are you hearing noise? While driving under load, under no load, or while coasting? Each one of these conditions often means you have a different problem to fix. Noisy rear axles are often best fixed with a replacement axle. They're not easy to repair, time consuming to R & R, and repairs will not always be successful.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC