Where to source plastic washer for seat? (part #A1139180096 )

[mrfatboy]

One of my seats for my 69 280sl is missing the 4 plastic washers (buffers) that are sandwiched between the seat cover and the outside hinge hardware of the seat. There are 2 on each side of seat.  I have called all the usual suspects for availability with no luck.  The classics center suggests making them. Pictures below.

Does anybody know where to get these?

Does anybody know where to get a substitute?

Has anybody made there own? if so, what material did you use and where did you get it?

Thanks much.

[StevenF]

http://sls-hh-shop.de/main/en/categories_name-c-0/a1139180096-plastic-washer-298401-p-7586
http://www.genuinemercedesparts.com/oem-parts/mercedes-benz-rubber-buffer-1139180096

[mrfatboy]

Yes, I saw those. I actually got the above picture from the sls website .  Both NLA.  I think I need to manufacture something. I'm still looking for ideas.

[StevenF]

 
Try
Ken Brown ---he has a lot of parts that NLA
Parts Manager
Mercedes-Benz of Monterey
831 375-2456 ext. 150
ken@stahlmotorco.com

If not  : https://www.niemoeller.de/en/search/detail/D%2091%20319

what about Buds?

[mrfatboy]

I tried those also.  No luck.  Even called SLTECH.  They have a small amount but are keeping for themselves.

[Flyair]

seems like something very easy to print in 3D, provided that there is an original piece

[StevenF]

Try Dave Gallon--his name is listed in our suppliers list.
what about Babak ---Also listed in our suppliers list
check
https://autopartmaster.com/en/?action=catalog_part&cat=mercedes&cod=1139180096&price_type=retail

[mrfatboy]

I have considered 3D printing. I have originals from the other seat I can copy from.

I'll ask Dave also.

[Shvegel]

Easy turning job on a lathe.