Author Topic: quarter window rubber seals  (Read 3179 times)

vegimite

  • Guest
quarter window rubber seals
« on: April 13, 2017, 11:28:36 »
I am replacing the rubber seals on my hardtop quarter windows and unfortunately I lost my disassembly photos so I don't know which way the rubber sits on the glass. (ie which is the out facing side of the rubber)  would anyone have a good close up photo to help??

cheers............Paul

EdwardBernard

  • Associate Member
  • Junior Level
  • *
  • Canada, AB, Edmonton
  • Posts: 22
Re: quarter window rubber seals
« Reply #1 on: April 18, 2017, 22:33:46 »
Hi, I have no photo, but when you look at the rubber seal, on one side there are lips cut along the lengths that will overlap the outside window chrome pieces. You can carefully run your fingernail or a pen point down the length of the overlap lips.
Bill Leddy, Edmonton, AB, Canada
1964 230 SL, red, manual, ps

rutger kohler

  • Associate Member
  • Gold
  • *****
  • New Zealand, Auckland, Auckland
  • Posts: 505
Re: quarter window rubber seals
« Reply #2 on: April 20, 2017, 23:04:05 »
Hi, several years ago I forwarded a copy of the MB setup to remove and replace these, to the website. It was cleaned up by Peter E and put into the onboard technical manual somewhere.  Should still be there

cheers

Ruger Kohler
1969 280 SL Manual gear shift
1972 280SE 3.5 auto

Garry

  • Full Member
  • Platinum
  • ******
  • Australia, Victoria, Kyneton and Brisbane Queensland
  • Posts: 5236
  • Audit Committee
Re: quarter window rubber seals
« Reply #3 on: April 21, 2017, 07:21:44 »
The PDF in the Tech Manual how to replace the windows

https://www.sl113.org/wiki/uploads/Tops/SL%20Hardtop%20Sidewindows.pdf
Garry Marks
Melbourne/ Kyneton, Brisbane. Australia
1969 MB 280SL 5 speed RHD SOLD.
1965 MB 230SL Auto RHD Lt Blue 334G, Top 350H, Tourist Delivery.
1972 MB 280CE Auto RHD 906G
2005 MB A200
2006 MB B200
2019 Izuzu DMax 4x4 Slide-on camper.
2022 Volvo XC40 Electric
2024 Volvo EX30 Electric

vegimite

  • Guest
Re: quarter window rubber seals
« Reply #4 on: February 10, 2018, 03:18:38 »
Thanks folks I managed to nut it all out.   late reply as I have not been on this site for a long time.  restoring a BMW E9 now..............Paul