« previous next »
Pages: [1]

Author Topic: 123 ignition loose hold down clips  (Read 2293 times)

dakman29

  • Full Member
  • Senior
  • ***
  • USA, WA, Spokane
  • Posts: 179
123 ignition loose hold down clips
« on: September 29, 2018, 17:07:45 »
I have a 123 electronic ignition in my car (68 280 sl).  I find that the hold down clips do not fasten tightly to the cap.  Just wanted to know if anyone else experienced this issue and is there a recommended fix.  For the time being I've just put some putty in the area on the cap where the clip fastens.  Not a very elegant fix, however.  Any suggestions?  Thanks.
Logged

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5492
Re: 123 ignition loose hold down clips
« Reply #1 on: September 29, 2018, 17:34:32 »
Yes, similar issue, I wrote about it some time ago - the spring clips went lose. I bent them back so that they fit. You can do it with your fingers without taking the cap out, which is not good...they are too soft.
« Last Edit: September 29, 2018, 20:32:03 by Pawel66 »
Logged
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

Tyler S

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Encinitas
  • Posts: 1613
Re: 123 ignition loose hold down clips
« Reply #2 on: September 29, 2018, 18:55:43 »
Yes as Pawel writes. Add/bend more of an arch into them.
Logged
1968 (67) 250sl. 4 speed manual. DB180 Silver
1955 220 Cabriolet A. White Grey
2019 E450 Wagon. Majestic Blue
1936 Ford PU Flathead V8. Creme on tan interior.
1989 Volkswagen T3 Westfailia Campmobile. Dove Grey (blue)
Pages: [1]
« previous next »