« previous next »
Pages: [1]

Author Topic: oil pump  (Read 1726 times)

steves sl

  • Full Member
  • Regular
  • **
  • USA, WI, CEDARBURG
  • Posts: 85
oil pump
« on: August 13, 2018, 20:30:38 »
I am getting ready to send my block to the machine shop. The oil pan is off....removed the two bolts on the oil pump (1 at the block and the other at the extended nut on the main cap). I just want to be sure that I know to remove the oil pump..just in case the shop asks me. What else do I have to do?
Logged
S. Schlaefer

steves sl

  • Full Member
  • Regular
  • **
  • USA, WI, CEDARBURG
  • Posts: 85
Re: oil pump
« Reply #1 on: August 18, 2018, 16:44:22 »
Help! Are there any other fasteners or do I have to tap on the oil pump shaft with the drive tang from above?
Logged
S. Schlaefer

Kevkeller

  • Full Member
  • Silver
  • ****
  • USA, HI, Honolulu
  • Posts: 388
Re: oil pump
« Reply #2 on: August 18, 2018, 17:53:39 »
That’s it.  Just pull it out.  Not too hard.
Logged
1970 280 SL

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: oil pump
« Reply #3 on: August 18, 2018, 23:33:35 »
Twist while pulling and it will come out easily.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
Pages: [1]
« previous next »