« previous next »
Pages: [1]

Author Topic: Glove box rod  (Read 3381 times)

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Glove box rod
« on: November 22, 2018, 01:06:09 »
Having a problem.  Am missing the curved rod on the back of the glovebox.  I am getting ready for paint so this is the time to deal with it.  Any suggestions .   If I could get one it is the time to weld it on.   Maybe even a good photo and some dimensions so I could try and make one.   Any ideas?
Logged

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1453
Re: Glove box rod
« Reply #1 on: November 22, 2018, 07:53:16 »
Logged

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: Glove box rod
« Reply #2 on: November 22, 2018, 10:47:26 »
Thanks for the info.  I am looking for the curved rod that stops the door from opening to far.  Will deal with the spring issue later.
Logged

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1453
Re: Glove box rod
« Reply #3 on: November 23, 2018, 10:13:31 »
Hi,
attached a picture with the rough measures.
...WRe
Logged

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: Glove box rod
« Reply #4 on: November 23, 2018, 14:34:34 »
Thanks for the diagram    I will give it a try.
Logged

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1480
Re: Glove box rod
« Reply #5 on: November 23, 2018, 22:38:59 »
Here are some pics of mine. It broke during disassembly. Still need to clean the weld a bit.
The rod measures approx. 6 mm in dia.
Dirk
Logged
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: Glove box rod
« Reply #6 on: November 25, 2018, 21:02:25 »
Great pictures .    This will help a lot.
Logged

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1480
Re: Glove box rod
« Reply #7 on: November 25, 2018, 22:25:06 »
If you are making the rod from scratch, let me know and I can make you a sketch with some additional dimensions.
Dirk
Logged
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: Glove box rod
« Reply #8 on: November 26, 2018, 02:30:26 »
That would help. I am going to make one from scratch,  will post a picture when I am done.
Logged

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1480
Re: Glove box rod
« Reply #9 on: November 26, 2018, 17:30:22 »
Attached is a sketch, with dimensions coming from mine. It varies slightly from what Wre posted. You will have to test it with the door and the compartment  assembled prior to finishing (painting) it.
hope that helps.
Logged
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI

reg

  • Full Member
  • Junior Level
  • *
  • Canada, BC, Victoria
  • Posts: 28
Re: Glove box rod
« Reply #10 on: November 26, 2018, 21:12:39 »
Thank you .   Should be all I need.
Logged

Atazman

  • Associate Member
  • Silver
  • ****
  • USA, Ca, Pleasanton
  • Posts: 282
Re: Glove box rod
« Reply #11 on: November 27, 2018, 03:05:58 »
That is one nice drawing, Dirk!!
Logged
Don
67 250 Sl
(#3168) from Italy
5-speed/Posi/AC/Kinder
Pages: [1]
« previous next »