4 Hole Rubber Sleve for Brake and Fuel line clamps

[Bill Sgro]

I have been looking for the 4 Hole Rubber Sleeve for the brackets that hold the brake and fuel lines that run the length of the car.  I see plenty of 3 hole sleeves but no 4 hole sleeves.  Are they available anywhere?

[Dave H]

A1094760384     Google the part number, plenty of suppliers this side of the pond.

[Jack Jones]

The part is available from any Mercedes dealer with a MSRP in the US of $8.50. This part was not available a couple of years ago but is now.

[Bill Sgro]

Thanks Jack.  My MB dealer here in Sarasota tried to order it and got the three hole one.  Do you have a part number?

[Bill Sgro]

That A1094760384 was a good number.  There is 1 in New Jersey and 1000 in Germany.  Thanks for the help!

[Shvegel]

About a year ago I checked with the Classic Center and the 4 hole was no longer available and was not coming back.  They are pretty limited as they are 1970-71 US spec only.   If you are still looking I would suggest trying to find someone with a water jet to cut them out of rubber stock. 

[Shvegel]

As an alternative the 4th hole is for a plastic line that runs from the trunk to the engine.  In a pinch you "Could" use the three hole ones and clip the 4th line to one of the hard lines using the white clips that go between the rubbers.  They are still available.