« previous next »
Pages: [1]

Author Topic: What is that for ?  (Read 1599 times)

yves

  • Full Member
  • Silver
  • ****
  • France, Poitou-Charentes
  • Posts: 366
  • Happy owner of a 69/ 280 sl , 63 Etype ,55 XK 140
What is that for ?
« on: September 28, 2019, 20:58:45 »
I have inspected Under the car and discovered a screw which was loosened around the axle ? I Don't know what is the utility of that screw? It was loosened because of a  crushed thread .
Does someone can explain what is this screw made for and how it can be crushed ?
Is it a screw for an special adjustment ?
Logged
Happy owner of a 69 blue 280SL ,  63 FHC  osb E-type , 55 FHC XK 140 to be restored...

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: What is that for ?
« Reply #1 on: September 28, 2019, 23:15:47 »
Both the 19mm and 17mm head bolt should be fully tight. They are not an adjustment. They secure the rubber mountings and diagonal strut to the differential.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

yves

  • Full Member
  • Silver
  • ****
  • France, Poitou-Charentes
  • Posts: 366
  • Happy owner of a 69/ 280 sl , 63 Etype ,55 XK 140
Re: What is that for ?
« Reply #2 on: September 29, 2019, 06:29:17 »
Ok Thank's JA17
Logged
Happy owner of a 69 blue 280SL ,  63 FHC  osb E-type , 55 FHC XK 140 to be restored...
Pages: [1]
« previous next »