« previous next »
Pages: [1]

Author Topic: Is There A Bracket Holding Warm Up Air Line On FIP Side?  (Read 1571 times)

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5494
Is There A Bracket Holding Warm Up Air Line On FIP Side?
« on: October 05, 2019, 14:33:13 »
In the late version (280SL) the metal line providing warm up air from WRD to CSV, goes around back of the engine, is held by a bracket to intake manifold - but is it held by any bracket in the back of the engine or on the FIP side?

I cannot find it on the pictures I have.

There is a rubber piece between this line and WRD fitting. On this side this line feels a bit "unfixed" - I thought prhaps there is some bracket there holding it that I am not aware of...
Logged
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Is There A Bracket Holding Warm Up Air Line On FIP Side?
« Reply #1 on: October 06, 2019, 00:23:25 »
No bracket in back Pawell.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Is There A Bracket Holding Warm Up Air Line On FIP Side?
« Reply #2 on: October 06, 2019, 06:41:48 »
There's a bracket on the intake manifold that is shared with the dip stick tube for an automatic trans car but that's all I can think of.
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

wwheeler

  • Vendor
  • Platinum
  • ******
  • USA, TX, Dallas
  • Posts: 2898
Re: Is There A Bracket Holding Warm Up Air Line On FIP Side?
« Reply #3 on: October 06, 2019, 07:17:11 »
Seems like I put a section of rubber hose over the metal pipe behind the head just in case it wants to rattle. Yes, it is a bit loose on the WRD side.
Logged
Wallace
Texas
'68 280SE W111 coupe
'60 220SE W128 coupe
'70 Plymouth Roadrunner 440+6

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5494
Re: Is There A Bracket Holding Warm Up Air Line On FIP Side?
« Reply #4 on: October 06, 2019, 07:42:40 »
Thank you all for your kind replies!

wwheeler - I also had rattle there, against the firewall. And I also applied some sleeve, but it was about inserting th metal piece deeper into the rubber piece going into the WRD.

No bracket there, thank you!
Logged
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class
Pages: [1]
« previous next »