Author Topic: Fuel Pump Replacement (Read 8286 times)

Tewfiks · « **on:** October 21, 2019, 21:26:15 »

Hello All,

This is my first post on this forum. I have a 1970 280 SE Cabriolet. My fuel pump is non operational due to the electric motor not being functional. I have taken it apart and have tried to rebuild it to no avail. I have contacted Mercedes Classic and they say the pump is not available currently and there is no ETA for that part.

What options do I have at this point? Can I use the newer Bosch fuel pumps, as I have in my 280 SE 4.5 (w108)?

Any advice will be greatly appreciated.

Thanks

doitwright · « **Reply #1 on:** October 22, 2019, 02:29:57 »

Your first option when searching for information on this site should always be to use the search function. We have a member Bob Youngman who has become an expert at rebuilding the fuel pump.

wwheeler · « **Reply #2 on:** October 22, 2019, 03:08:43 »

Bob Youngman is the first stop. There are other vendors like Authentic classics that sell new and rebuilt short pumps if you really want the factory style pump. There are not cheap though.

There are other pumps that will work in place of the factory pump and are not as expensive. They do not look the same but function ok. I know Bud’s Benz has one such pump and I believe there are others.

The newer pumps for the V-8’s will not work. They have the wrong specs. So be careful that the pump you do buy (if not the factory style) has the correct specs. The specs should be found in the tech manual.

Tewfiks · « **Reply #3 on:** October 22, 2019, 13:00:42 »

The issue with my pump is that the armature has "melted"....
Not sure why this has happened, maybe trying to start the car via a battery charger.
I think I have located a person that is willing to rewind the armature, Advance Electrical Rebuilders out of Michigan.
Mercedessource has also directed me to using the Bud's Benz newer unit. I will need to give them a call to get the details
of their set up.

Thanks for the responses.

Tewfiks · « **Reply #4 on:** October 22, 2019, 13:04:09 »

Here is what I found when I disassembled the fuel pump :

Tyler S · « **Reply #5 on:** October 22, 2019, 13:54:21 »

Definitely get in touch with Bob Youngman (BaronYoungman). He will be able to help you out with a rebuild and armature repair. See link below:

https://www.sl113.org/forums/index.php?topic=29008.msg209742#msg209742

Chris_ATL · « **Reply #6 on:** October 22, 2019, 16:56:40 »

A good replacement until you fix/find a new pump is the carter one mentioned in the thread below... It's only around $120 and works well

https://www.sl113.org/forums/index.php?topic=18970.0

Tewfiks · « **Reply #7 on:** October 22, 2019, 21:41:18 »

After speaking with Bob today, I will be sending it to him for repair.
What a wealth of information.
Many thanks for pointing me in his direction

m300cab · « **Reply #8 on:** October 25, 2019, 01:28:30 »

Why wouldn't a 4.5 pump work?

btw , I have a new 450sl pump, if interested in having something in the meantime

Benz Dr. · « **Reply #9 on:** October 25, 2019, 01:40:08 »

A 4.5 fuel pump is for D jet and it runs at a much higher operating pressure. At least 30 PSI as compared to our cars that run at 10 - 15 PSI.

SEB · « **Reply #10 on:** November 10, 2019, 10:38:06 »

I have a question related to the short pump. Unfortunately, I have a pump with a damaged impeller (rotor) and I was forced to buy the a new one short Bosch pump.
Do you know whether only the pump core can be purchased on the American market?

scoot · « **Reply #11 on:** November 10, 2019, 15:21:26 »

Quote from: SEB on November 10, 2019, 10:38:06

I have a question related to the short pump. Unfortunately, I have a pump with a damaged impeller (rotor) and I was forced to buy the a new one short Bosch pump.
Do you know whether only the pump core can be purchased on the American market?

I had cores but I sold them to Bob Youngman. You might contact him if you need a part and maybe he'll sell you that part...

wwheeler · « **Reply #12 on:** November 11, 2019, 03:22:43 »

Bob has become an expert on these pumps and I believe he is making an improved impeller as a replacement.

SEB · « **Reply #13 on:** November 11, 2019, 09:53:52 »

Gents
many thanks for this advise. Does anybody know how to contact Bob directly? For instance an E-Mail? Company name or web side?

JamesL · « **Reply #14 on:** November 11, 2019, 10:35:03 »

You can PM him - do a member search on his forum name (above) and send him a message that way

neelyrc · « **Reply #15 on:** November 11, 2019, 10:43:20 »

His forum name for sending PM is BaronYoungman.

SEB · « **Reply #16 on:** November 11, 2019, 18:21:26 »

Gents!
Many thanks! But I was more thinking, about his professionall address. Knowing me, for instance, I do not have time to look on this side very often- only on weekends.

Iconic · « **Reply #17 on:** November 12, 2019, 18:46:17 »

If you "PM" (personal message) him on this site he will most likely get an email.
He is active on the site.
If you have problems, contact me and I'll get the message to him.
Mark

SEB · « **Reply #18 on:** November 16, 2019, 15:52:38 »

I think I need your help. Few days ago I wrote to him a PM, but until now with out response?

News:

Author Topic: Fuel Pump Replacement (Read 8286 times)

Tewfiks

Tewfiks

Tewfiks

Chris_ATL

Tewfiks