« previous next »
Pages: [1]

Author Topic: Sway bar bushing 250sl  (Read 1792 times)

mauro12

  • Full Member
  • Gold
  • *****
  • Italy, Sicily, Messina
  • Posts: 643
Sway bar bushing 250sl
« on: December 17, 2019, 22:33:45 »
Hello guys, I wanted to know from you if the correct bushing size for a 250SL is the 20mm or 22??
thank you
Logged
Mauro Pisani
250sl 1967 5speed zf manual

mauro12

  • Full Member
  • Gold
  • *****
  • Italy, Sicily, Messina
  • Posts: 643
Re: Sway bar bushing 250sl
« Reply #1 on: December 18, 2019, 19:11:52 »
I read that there are 2 sway bar bushing diameter , 20 and 22mm. Which one fits the 250sl?
Logged
Mauro Pisani
250sl 1967 5speed zf manual

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Sway bar bushing 250sl
« Reply #2 on: December 18, 2019, 20:24:07 »
Measure your sway bar and go from there.
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

mauro12

  • Full Member
  • Gold
  • *****
  • Italy, Sicily, Messina
  • Posts: 643
Re: Sway bar bushing 250sl
« Reply #3 on: December 19, 2019, 08:58:16 »
On the internet is written that correct size bushing for the 250 is the 22mm. is it right? Is quite difficult to measure the sway bar.
Logged
Mauro Pisani
250sl 1967 5speed zf manual

114015

  • Full Member
  • Platinum
  • ******
  • Germany, Nordrhein-Westfalen, Tecklenburg
  • Posts: 2080
Re: Sway bar bushing 250sl
« Reply #4 on: December 19, 2019, 09:56:31 »


Just use a vernier caliper.
Pretty forward.
Logged
Achim
(Germany)
Pages: [1]
« previous next »