« previous next »
Pages: [1]

Author Topic: Injection Pump check valve  (Read 3225 times)

bracurrie

  • Full Member
  • Senior
  • ***
  • USA, TN, Nashville
  • Posts: 110
  • The SL to have is a 113, but I don't have one.
Injection Pump check valve
« on: March 19, 2020, 17:38:52 »
1970 280 SE with 2.8 straight six MFI
Does anyone know where I can obtain the check valve that is on the injection pump for the fuel line from the gas tank? Its part number 000-074-22-84
Brad
Logged
1970 280 SE W108.018
M130.980 w/ US emissions
manual column shift

bracurrie

  • Full Member
  • Senior
  • ***
  • USA, TN, Nashville
  • Posts: 110
  • The SL to have is a 113, but I don't have one.
Re: Injection Pump check valve
« Reply #1 on: March 20, 2020, 01:04:29 »
Thank you to the moderator for the relocation. My apologies. 
Logged
1970 280 SE W108.018
M130.980 w/ US emissions
manual column shift

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1453
Re: Injection Pump check valve
« Reply #2 on: March 20, 2020, 06:54:29 »
Hi,
you should ask workshops specialized in injection pumps.
I would ask:
- https://www.oldtimer-technik.eu/
- https://classic-manufactur-goslar.de/
- https://www.koller.de/
...WRe
Logged

FresnoBob

  • Full Member
  • Senior
  • ***
  • USA, CA, Fresno
  • Posts: 208
Re: Injection Pump check valve
« Reply #3 on: March 23, 2020, 23:16:10 »
In the US, I would ask Gus at Pacific Fuel Injection (in S. San Francisco).  (650) 588-8880.
Logged
Bob Comstock
1966 230 SL Euro Auto
2017 AMG C43 Cabriolet

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: Injection Pump check valve
« Reply #4 on: April 19, 2020, 21:58:49 »
Are you sure it is on the supply side of the pump and not the return at the rear of the pump?  The front fitting is usually open and the rear fitting is the check valve.
Logged
Pages: [1]
« previous next »