Author Topic: Power Steering Hose part#  (Read 2633 times)

col320ce

  • Full Member
  • Gold
  • *****
  • Australia, Victoria, Glen Iris
  • Posts: 590
Power Steering Hose part#
« on: April 18, 2020, 03:42:59 »
Can anyone identify the power steering part number for the red hose below the power steering oil reservoir in the photo?  W111 250SE coupe 1965.

Thanks!
Col

1964 230SL
1965 250SE coupe
1993 320CE Sportline

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5490
Re: Power Steering Hose part#
« Reply #1 on: April 18, 2020, 09:25:57 »
For 111.021 from chassis 08538, the hose reservoir to pump is A 006 997 09 82, sold by meters. It is not any elbow shaped in case you thought it might be.

Before chassis 08538 I do not have power steering parts in parts list.
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

col320ce

  • Full Member
  • Gold
  • *****
  • Australia, Victoria, Glen Iris
  • Posts: 590
Re: Power Steering Hose part#
« Reply #2 on: April 19, 2020, 10:33:45 »
Thanks, that is perfect!
I'll get some and try it as there is a good chance that it will fit.  I don't like the look of the kink in the one on my car ...
Col

1964 230SL
1965 250SE coupe
1993 320CE Sportline

wwheeler

  • Vendor
  • Platinum
  • ******
  • USA, TX, Dallas
  • Posts: 2898
Re: Power Steering Hose part#
« Reply #3 on: April 19, 2020, 15:46:58 »
They make a spring that fits inside a hose like this to prevent collapsing. If you are using an MB hose with a part number, the material should be ok. Auto trans fluid is hard on materials and you want to use a hose material that is made for that. 
Wallace
Texas
'68 280SE W111 coupe
'60 220SE W128 coupe
'70 Plymouth Roadrunner 440+6

specracer

  • Full Member
  • Senior
  • ***
  • USA, MA, Duxbury
  • Posts: 245
Re: Power Steering Hose part#
« Reply #4 on: April 19, 2020, 22:42:34 »
I replaced this hose last week. someone had done it before, and it was rubbing the battery tray, wore through. I was able to tweak the reservoir (it was too low), and get a natural bend (with out a kink).