I got the bezels off the gages, and cleaned the glass today. Couldn't get the bezels back on, so I'll take them to a speedo shop to do.
The tach and speedo are covered in the rear with some sort of clay-like material. This has pretty much crumbled away, and I'm wondering if I should replace them, or if I can simply wrap white paper and duct tape around the gages. I think they work to reflect light to the instruments.
As for the lights, I found the 4 watt bulbs used for the tach and speedo at Autozone, but neither they nor NAPA have the 2 watt bulbs used behind the center gages. NAPA has a 0.7 candle power bulb that will fit, and is shown in their reference book as correct for a 1969 MB. However, the glass part is bulbous rather then cylindrical like the ones I am replacing. And, i don't know if 0.7 candle power equates to 2 watts. Are the correct 2-watt bulbs a dealer item? The Autozone guy said to just use the 4 watt bulbs.
Thanks for any advice, as usual.
Joe
1965 230SL