Author Topic: Rosette for Glove Box..  (Read 2323 times)

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Rosette for Glove Box..
« on: January 20, 2021, 23:20:08 »
hello all, I'm planning to install another radio in my 230sl and while I've got the glove box out, I thought I'd install the little rosette that's been missing since I've owned the car. The only one I can find (CONUS) is from Authentic Classics: https://www.authenticclassics.com/Chrome-Glove-Box-Lid-Arm-Rosette-or-Bezel-230SL-p/auth-008064.htm. These little things are expensive! :P. Does anyone know of an alternative source? 

Garry

  • Full Member
  • Platinum
  • ******
  • Australia, Victoria, Kyneton and Brisbane Queensland
  • Posts: 5236
  • Audit Committee
Re: Rosette for Glove Box..
« Reply #1 on: January 20, 2021, 23:33:10 »
Charles,


I am at exactly the same spot as you and about to change over my radio.


I purchased a rosette a few years back from, at the time, the only supplier in US and I can tell you it was a whole lot more than what they are charging now. The following two appear to be the only ones at the moment.


And you think Authentic Classics are expensive.  Have a look at SLS Germany and convert


Authentic $39
https://www.authenticclassics.com/Chrome-Glove-Box-Lid-Arm-Rosette-or-Bezel-230SL-p/auth-008064.htm


SLS Germany 33 Euro.
https://www.sls-hh-shop.de/main/en/mercedes-230-280sl-w113-/68-a-dashboard-covering/escutcheon-dull-for-link-rod-glove-box-p-134335
Garry Marks
Melbourne/ Kyneton, Brisbane. Australia
1969 MB 280SL 5 speed RHD SOLD.
1965 MB 230SL Auto RHD Lt Blue 334G, Top 350H, Tourist Delivery.
1972 MB 280CE Auto RHD 906G
2005 MB A200
2006 MB B200
2019 Izuzu DMax 4x4 Slide-on camper.
2022 Volvo XC40 Electric
2024 Volvo EX30 Electric

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1480
Re: Rosette for Glove Box..
« Reply #2 on: January 21, 2021, 00:26:55 »
Here they are for less, but alum.
http://www.pagode-markt.de/
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI

sandcrab59

  • Full Member
  • Silver
  • ****
  • USA, MA, Lunenburg
  • Posts: 443
Re: Rosette for Glove Box..
« Reply #3 on: January 21, 2021, 13:52:39 »
At one of the blacklicks I purchased a couple of sets from Dave Gallon from southern Calif.
If you can reach him he might have them. They were no where as expensive as posted above.
Tom M
71 280SL-8  Euro
67 250 SL
72 220 D
1982 300 SD
1983 300SD
1985 300SD
1931 Model A Ford Roadster
1997 Corvette C5

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: Rosette for Glove Box..
« Reply #4 on: January 21, 2021, 16:19:05 »
Garry/Dirk/Tom, thanks guys. I sent Dave Gallon and Mehmet a PM regarding the rosette.

I found a post from Ctaylor (dtd 3/6/2015) that provides outstanding instructions for installation of the rosette: https://www.sl113.org/forums/index.php?topic=22023.msg157124#msg157124. I gotta admit that I'm beginning to lose heart after learning the door has to be removed - realigning the door, the glove box shell, and the rosette isn't going to be easy.. 

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: Rosette for Glove Box..
« Reply #5 on: January 21, 2021, 19:52:24 »
I remember from an old post that there's a clip that secures the Map-Light wire to the bottom of the glove box after it exits at the bottom of the door. Does anyone recall seeing such a clip or know whether its available?

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: Rosette for Glove Box..
« Reply #6 on: February 01, 2021, 01:45:08 »
well I went ahead and ordered a rosette from Authentic Classics since I needed a dash speaker and a couple of other things from them. I installed the rosette today and thanks to Ctaylor's instructions, realigning the glove box door wasn't that bad - just had to go slow and take care not to scratch the door or dash. I'll install the new dash speaker once I replace the broken bulb holder on the heater control lever. Thanks again to Joe (JA17) for the bulb holder!  :)
« Last Edit: February 01, 2021, 02:58:03 by Charles 230SL »