Author Topic: Dry ice blasting/cleaning  (Read 2565 times)

GM

  • Associate Member
  • Gold
  • *****
  • USA, CA, San Pedro
  • Posts: 584
Dry ice blasting/cleaning
« on: April 21, 2021, 15:42:40 »
Has anyone seen a DIY method of dry ice blasting? They want a lot of money to do this...but it is addicting to watch
https://www.youtube.com/watch?v=etDMnV9epms
Gary
1971 280SL - Sold
(98 from the end of production)
DB180 Silver Gray Metallic
Black MB Tex

Chris Long

  • Associate Member
  • Senior
  • ***
  • USA, NJ, Morristown
  • Posts: 175
Re: Dry ice blasting/cleaning
« Reply #1 on: April 22, 2021, 00:23:49 »
I wish there was somewhere in NJ that does this!
1970 280sl 4-Speed Horizon Blue

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5721
    • http://SL113.org
Re: Dry ice blasting/cleaning
« Reply #2 on: April 22, 2021, 01:38:37 »
I don't get it though. It cleans the underside. Once you resume driving, it will get dirty again. Nothing all that wrong about a not-very-clean underside?
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

Anthony

  • Associate Member
  • Junior Level
  • *
  • Belgium, Flanders, Deerlijk
  • Posts: 47
    • www.classic-mercedes-parts.com
Re: Dry ice blasting/cleaning
« Reply #3 on: April 22, 2021, 06:34:42 »
The cost of a dry ice machine is also ridiculous. MRSP for a Karcher machine was over 15K EUR.

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2926
    • http://www.colinferns.com
Re: Dry ice blasting/cleaning
« Reply #4 on: April 22, 2021, 10:37:31 »
I use bags of dry ice to freeze sound deadening felt so it can be easily removed by tapping with a rubber mallet.

Vander

  • Full Member
  • Silver
  • ****
  • USA, OH, Columbus
  • Posts: 387
Re: Dry ice blasting/cleaning
« Reply #5 on: April 22, 2021, 10:50:55 »
The actual machine is only one component needed for a complete vehicle set-up. Everything you need to dry ice blast a vehicle will cost about $100k usd. Shops will charge $250-300 /hour to blast your vehicle, expect to spend a few grand total getting it done.

Another alternative you can do is steam cleaning.
1969 280SL

mnahon

  • Full Member
  • Silver
  • ****
  • Canada, QC, Montreal
  • Posts: 436
Re: Dry ice blasting/cleaning
« Reply #6 on: April 22, 2021, 15:42:57 »
I had some dry ice blasting done on my car to remove tar undercoating in 2016, costing $538/hr. To be fair that price did include some displacement on their part, to bring their equipment to a location where the blasting could be done.
https://www.nitrofreeze.com/
Meyer Nahon
Montreal, Canada
1968 MB 280SL Auto Euro LHD Silver
2021 Tesla Model 3

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Dry ice blasting/cleaning
« Reply #7 on: April 22, 2021, 18:26:50 »
The benefit to dry ice blasting is there's nothing left from the blasting medium. 
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

lreppond

  • Full Member
  • Gold
  • *****
  • USA, CA, San Leandro
  • Posts: 639
Re: Dry ice blasting/cleaning
« Reply #8 on: April 22, 2021, 22:06:31 »
Does it clean as completely and thoroughly as shown in the video loaded by GM?   Local environmental laws preclude hot steaming cleaning of engines and undercarriages because of hazardous waste products. Although expensive, I’d do it in a heartbeat were this service offered in my area. 
« Last Edit: April 26, 2021, 20:51:51 by lreppond »
~Len

1971 280 SL
576G red/251 Beige
4 speed manual
Family owned since new (father —> son)

Garry

  • Full Member
  • Platinum
  • ******
  • Australia, Victoria, Kyneton and Brisbane Queensland
  • Posts: 5236
  • Audit Committee
Re: Dry ice blasting/cleaning
« Reply #9 on: April 23, 2021, 00:46:30 »
Tom Colitt some years ago had some dry ice cleaning done on the underside of a Pagoda to show what the original paint colour was.  He had it done in LA but dont know where. I believe it can also take off a minor layer of paint.


Garry
Garry Marks
Melbourne/ Kyneton, Brisbane. Australia
1969 MB 280SL 5 speed RHD SOLD.
1965 MB 230SL Auto RHD Lt Blue 334G, Top 350H, Tourist Delivery.
1972 MB 280CE Auto RHD 906G
2005 MB A200
2006 MB B200
2019 Izuzu DMax 4x4 Slide-on camper.
2022 Volvo XC40 Electric
2024 Volvo EX30 Electric

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1454
Re: Dry ice blasting/cleaning
« Reply #10 on: April 23, 2021, 09:02:07 »
Hi,
some years ago I had cleaned my front axle because of all this grease and dirt of 50 years. It was done by a company specialized on dry ice cleaning but not for classic cars especially.
Yes, it cleaned everything but:
- it needs a lot if time and ice because the cleaning spots are small
- everything around is full of grease and dirt
- what I recognized later was a lot of grease in the engine compartment and around because of grease flying around
After some years a lot of grease and dirt is around the front axle again.
...WRe

Eric280SL

  • Associate Member
  • Junior Level
  • *
  • USA, CA, Los Altos
  • Posts: 33
blasting
« Reply #11 on: May 08, 2021, 14:22:25 »
I hired a vendor that did mostly  commercial work


Re: Dry ice blasting/cleaning naval jobs.  was very dissatisfied.technique was inadequate.   had to. do over with hand removal of paint and very stubborn under coat.


Eric280sl

1969 280SL. white ext. dark brown int
1970 280 SL  white  ext black int
toyota camty hybrid