Author Topic: Removal pins which hold chain guides (front of engine block) (Read 1821 times)

BartSt · « **on:** September 01, 2021, 11:34:24 »

All,

How do I remove the 2 pins (per chain guide)?

Is this the method?

Bart

450sl · « **Reply #1 on:** September 01, 2021, 12:23:24 »

Benz Dr. · « **Reply #2 on:** September 01, 2021, 15:15:18 »

I like to run a tap down the threads before I start. Nothing like breaking a screw off in one of those pins.

stickandrudderman · « **Reply #3 on:** September 01, 2021, 15:56:59 »

I use a slide hammer that I made 35 years ago from an old cylinder head bolt with the end turned down to M6 and a lump of round bar about 70mm diameter and 30mm thick as the hammer.

UJJ · « **Reply #4 on:** September 02, 2021, 13:57:16 »

Don't you have to remove the radiator in order to use a slide hammer?

stickandrudderman · « **Reply #5 on:** September 03, 2021, 15:54:45 »

Quote from: UJJ on September 02, 2021, 13:57:16

Don't you have to remove the radiator in order to use a slide hammer?

No, but it is wise to put a sheet of metal in front of the radiator so you don't damage it.

Pagoda SL Group

News:

Author Topic: Removal pins which hold chain guides (front of engine block) (Read 1821 times)

BartSt

Removal pins which hold chain guides (front of engine block)

450sl

Re: Removal pins which hold chain guides (front of engine block)

Benz Dr.

Re: Removal pins which hold chain guides (front of engine block)

stickandrudderman

Re: Removal pins which hold chain guides (front of engine block)

UJJ

Re: Removal pins which hold chain guides (front of engine block)

stickandrudderman

Re: Removal pins which hold chain guides (front of engine block)