Author Topic: Pagoda EV  (Read 4768 times)

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Pagoda EV
« on: August 24, 2021, 14:17:33 »
Some years ago I saw first time this car on a YT video. Since this time I still think about such project. I was even trying to contact this person to get some more information, but without success. Maybe in some years we will be forced by law to go electric?

https://losangeles.craigslist.org/wst/cto/d/venice-sl-mercedes-ev-conversion-obo/7369908968.html

I am curious about your opinion and does anyone know what the material costs are?
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5717
    • http://SL113.org
Re: Pagoda EV
« Reply #1 on: August 24, 2021, 14:59:13 »
Funny about this, to me at least, is that the lister/seller's location is shown as within 1 km of our yacht in the marina, in Marina del Rey which neighbours Venice Beach. If that is correct, I can go have a face-to-face chat with the guy/lady.

I expect that synthetic fuels will remain available so we can run our oldtimers, for which there likely will be exemptions to 'no more fossile fuel automobiles' that's been signed into law in more and more countries. I think we just had this discussion in another thread. But equally interesting will be these EV conversions, also as rebuild parts become scarcer and even more expensive. With the huge increases in volume of production of motors, controllers, chargers and batteries, the prices of EV conversions, at least the basic hardware, will likely plummet over the coming years. So it may become a fairly easy thing to do before too long.   
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

badali

  • Full Member
  • Platinum
  • ******
  • USA, Pa, Butler
  • Posts: 1067
  • 1966 230SL
Re: Pagoda EV
« Reply #2 on: August 24, 2021, 18:38:56 »
Here is the BAT listing.  It did not do well...


https://bringatrailer.com/listing/1964-mercedes-benz-230sl-14/
Brad

1961 220 Sb
1966 230 SL (Sold)
2019 E 450 4 Matic
2022 GLC 300 4 Matic

johnk

  • Full Member
  • Platinum
  • ******
  • USA, OH, Avon
  • Posts: 1166
Re: Pagoda EV
« Reply #3 on: August 24, 2021, 22:17:28 »
YUK - to be totally honest.

Red interior with brown seats. How much of the rest of the car is basturdized? Nothing of what I see looks well done.
John Krystowski
Avon Ohio
1968 Euro 280sl under restoration
2016 Jag F-Type R sold june 2021
1950 Alfa Romeo 6C 2500 SS For sale
2008 E350
2007 GL 450
2019 BMW 540

lreppond

  • Full Member
  • Gold
  • *****
  • USA, CA, San Leandro
  • Posts: 639
Re: Pagoda EV
« Reply #4 on: August 25, 2021, 03:29:15 »
Ditto to johnk’s comments!

I have no issue with such conversions, but for goodness sake keep the car looking otherwise genuine. 
~Len

1971 280 SL
576G red/251 Beige
4 speed manual
Family owned since new (father —> son)

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: Pagoda EV
« Reply #5 on: August 25, 2021, 08:20:05 »
Totally agree with your comments regarding the interior etc.
But does anybody know what are the material (hardware) costs for such conversion?
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2922
    • http://www.colinferns.com
Re: Pagoda EV
« Reply #6 on: August 25, 2021, 08:50:20 »
But does anybody know what are the material (hardware) costs for such conversion?
Here in the UK there's a garage that specialises in EV conversions.
A customer got a quote: £60000!

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: Pagoda EV
« Reply #7 on: August 25, 2021, 09:17:24 »
Many thanks, but the question is out of this quotation what are the hardware costs?
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: Pagoda EV
« Reply #8 on: August 27, 2021, 20:44:25 »
Ford just announced they will sell an EV crate motor. Supposedly around $3,500 with harness but without controller and without battery. Probably looking at 10K for a working package
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: Pagoda EV
« Reply #9 on: August 28, 2021, 17:44:57 »
Many thanks for this information.
It looks like the price is approaching the cost of an engine overhaul. So maybe this will be the moment to think about this?
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5717
    • http://SL113.org
Re: Pagoda EV
« Reply #10 on: August 29, 2021, 04:07:34 »
Well the $10K is just the hardware and just as with an engine rebuild (or any work on cars really), the labor to install everything will add a considerable amount to the tab. Could well be another $10-20K?

My son and I decided we'll convert a Porsche 912 in the near future so we will find out how it all works.
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: Pagoda EV
« Reply #11 on: August 29, 2021, 12:47:16 »
So keep me posted Cees. I have also a similar idea with a VW Beetle or Karmann Giha.
I think in Europe we will have probably a big problem to get the necessary permits for the registration of such EV?
I do not checked this yet, but it can be not easy.
As you know the old Indian proverb says, that all arrows are aimed at the first :-)
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

teahead

  • Associate Member
  • Gold
  • *****
  • USA, WA, Des Moines
  • Posts: 781
  • aka "Rob"
Re: Pagoda EV
« Reply #12 on: September 14, 2021, 23:34:13 »
If the body is super solid, and has the ragtop, then $40k isn't TOO bad me thinks.

Looks decent to me (picture from BHCC):



Seat redo is easy.

The 5-speed sure is interesting.

I just wonder if it's a total hack job or done well. 

Just poor presentation from the BAT no sale.

I would have kept the Ford V8 in it. 
« Last Edit: September 14, 2021, 23:38:31 by teahead »
1970 280SL auto, AC - aka "Edelweiss"

450sl

  • Full Member
  • Silver
  • ****
  • Netherlands, Gelderland, zelhem
  • Posts: 494
Re: Pagoda EV
« Reply #13 on: September 15, 2021, 09:43:26 »
Cees,

I have seen a documentary on tv, of a US company that makes complete kits for the porsche 911, its take less than 2 days to convert.

They use Tesla parts from accident cars. might be worth to google.

Mark

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5717
    • http://SL113.org
Re: Pagoda EV
« Reply #14 on: September 15, 2021, 11:42:20 »
Many thanks Mark, that sounds like just the thing we will need. Two days, that seems very quick!
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: Pagoda EV
« Reply #15 on: September 15, 2021, 11:42:52 »
It is "relatively easy" to put an electric motor and a matching transmission into a CEV. But how about the battery? This thing is big and needs cooling. I would be suspicious of any job like that being done properly in 2 days. Not that it really matters, because I will not convert any of the cars I have to EV. 8)
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

450sl

  • Full Member
  • Silver
  • ****
  • Netherlands, Gelderland, zelhem
  • Posts: 494
Re: Pagoda EV
« Reply #16 on: September 15, 2021, 11:59:39 »
In this kit the motor is placed in a steel frame and directly bolts onto the frame as is the batterypack.
Most time is spend to convert the dash instruments.

it sure look likes they did it in 2 days..........


maybe these guys?

https://electricporsche911.com/

or these:
https://www.evwest.com/catalog/product_info.php?products_id=224

badali

  • Full Member
  • Platinum
  • ******
  • USA, Pa, Butler
  • Posts: 1067
  • 1966 230SL
Re: Pagoda EV
« Reply #17 on: September 15, 2021, 12:07:25 »
It doesn't look worth it since it will not go 80 miles on a charge.  The description says it will only go 49 MPH unless you change the gears.  The cosmetic condition of the car is bad also.  Not worth the asking price in my opinion.
Brad

1961 220 Sb
1966 230 SL (Sold)
2019 E 450 4 Matic
2022 GLC 300 4 Matic

450sl

  • Full Member
  • Silver
  • ****
  • Netherlands, Gelderland, zelhem
  • Posts: 494
Re: Pagoda EV
« Reply #18 on: September 15, 2021, 12:14:20 »
Dont shoot the messenger  :)

GM

  • Associate Member
  • Gold
  • *****
  • USA, CA, San Pedro
  • Posts: 583
Re: Pagoda EV
« Reply #19 on: September 15, 2021, 18:46:28 »
I've been looking into this a lot, myself.
"ElectricPorsche911" is really ZeroEV in the UK - https://zero-ev.co.uk/?v=7516fd43adaa
Here's a kit they have for a 964 (1989-1994) Porsche 911 - https://www.youtube.com/watch?v=pNyn0SYBB-c
Very impressive - bolt-in kit with no permanent modifications to the existing vehicle.
If anyone knows of a 911 or 912 with a blown engine 8) (late '60s to 70's) I'm very interested, PM me.
« Last Edit: September 15, 2021, 19:16:46 by GM »
Gary
1971 280SL - Sold
(98 from the end of production)
DB180 Silver Gray Metallic
Black MB Tex

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: Pagoda EV
« Reply #20 on: September 16, 2021, 13:50:32 »
Thank you very much Gary for the quite interesting links. It give a overlook for such project.
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),