« previous next »
Pages: [1]

Author Topic: tightening torque  (Read 334 times)

Philippe VIARD

  • Full Member
  • Junior Level
  • *
  • France, Picardie, Aumont en Halatte
  • Posts: 22
tightening torque
« on: October 25, 2024, 09:10:09 »
Hello everybody,
What is the torque tightening of the 12 bolts of the gearbox support for a manual transmission?
Thank you for your answer
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: tightening torque
« Reply #1 on: October 25, 2024, 14:32:46 »
Be sure to clean and seal any bolts on the front and rear cover with sealant or they will leak transmission fluid since they enter into the gear box. They will leak transmission fluid if you do not.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Philippe VIARD

  • Full Member
  • Junior Level
  • *
  • France, Picardie, Aumont en Halatte
  • Posts: 22
Re: tightening torque
« Reply #2 on: October 25, 2024, 16:03:36 »
Thank you ja17 for your answer but my question was about the trapezoidal plate under the gearbox held by 12 screws of 10mm diameter with a thread length of 20mm
Logged
Pages: [1]
« previous next »