Author Topic: Advice on Ignition Barrel ceasure  (Read 3784 times)

n/a

  • Guest
Advice on Ignition Barrel ceasure
« on: July 14, 2005, 12:26:45 »
Hi, has anyone experienced problems with their Ignition Barrell? mine has ceased and I cannot obtain a replacement, I can get the barrell out of the car but then I'm at a loss - so your advice on how to get my little 230sl up and running again would be greatly appreciated.

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5719
    • http://SL113.org
Re: Advice on Ignition Barrel ceasure
« Reply #1 on: July 14, 2005, 14:52:43 »
Have you tried the search function? I seem to recall this was discussed not too long ago. Anyone have a quick fix?

Cees ("Case") Klumper in Amsterdam
'69 white 280 SL automatic
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Advice on Ignition Barrel ceasure
« Reply #2 on: July 14, 2005, 16:06:34 »
Beleive ones for right hand drive vehicles are still available from MB. Gold plated price though.

naj

65 230SL
68 280SL
68 280SL

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Advice on Ignition Barrel ceasure
« Reply #3 on: July 14, 2005, 16:44:34 »
Hello Anna,
These parts for your 230SL should be the same on the "finback" Mercedes sedans of the era. Find a good donor car with keys. For a 280SL find a good W108 Mercedes sedan donor.

If you cannot buy new, and you are really having problems finding good used parts let us know there are lots of donor cars over here.



Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

graphic66

  • Guest
Re: Advice on Ignition Barrel ceasure
« Reply #4 on: July 14, 2005, 22:45:30 »
My 230SL ignition just locked up. No way would it turn, the key wouldn't move. My locksmith couldn't even pick it. I had a barrel from a 250SL with a double cut key. I had read on this or the other forum that the later model with the double cut key would not fit the older model with the single cut key. I tried it anyways and it fit perfectly. The newer one protrudes from the dash a little further and had a mounting bracket clamped to it that bolted to a piece beside the radio in the dash. Rather than drilling holes I just left it off like the old one. So my conclusion is that any lock barrel from a 230, 250 or 280SL will interchange.

Malc

  • Guest
Re: Advice on Ignition Barrel ceasure
« Reply #5 on: July 15, 2005, 01:56:44 »
Have you tried the light oil in the barrel and running the key in and out afew times trick?
Malc

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Advice on Ignition Barrel ceasure
« Reply #6 on: July 15, 2005, 03:05:32 »
 :oops:  Just checked with dealer. The one for a RHD 230SL no longer available.  :oops:

However, the 250/early 280 ones for RHD are still available. :)
naj



65 230SL
68 280SL
68 280SL

Ben

  • Guest
Re: Advice on Ignition Barrel ceasure
« Reply #7 on: July 15, 2005, 03:31:12 »
quote:
The one for a RHD 230SL no longer available


Hence I have an ugly universal key switch on my dash !  :evil:

Regards,
Ben in Ireland.
'64 230SL 4sp.